Imagine a paint applied to bare aluminum foil without primer that you could crease tightly with your fingernail, or crunch it up into a tight little ball, and then release it, and nothing happens to the paint.

Would that flexibility and adhesion amaze you?

What if I also said this extraordinary paint is absolutely non-toxic?

These are just two of the remarkable properties our new marine paint provides.

Please give me 2 minutes of your time. I promise you that during these two minutes I will change the way you think about the paint you currently use, and how our non-toxic product will save you significant money for years to come.

I am excited to introduce you to a new topside marine paint product that is unlike ANYTHING you are currently using.

Our new marine paint product is called EcoKote™. We are calling it "A Revolution in Marine Paint". Why? EcoKote is the only non-toxic topside marine paint in the world that works.

EcoKote is environmentally sound in every respect, and is not harmful in any step of the entire process, from shipping to the eventual discarding of unused product.

How can this be? Here are a few of the superior qualities of this remarkable new product:

• Environmentally responsible in every way. Does not contain any toxic substances.
• Get your equipment back to work by cutting paint shop time by as much as 70%. EcoKote requires fewer coats, fewer steps, less time between steps, and dries in minutes. Apply second coat same day.
• Not affected by salt water, acids, or bases. Non-susceptible to chemicals and petroleum/diesel products, and other environmental hazards.
• 50% less expensive than major solvent competitors on a per Sq Ft basis.
• Perfect Color matching if damage occurs, even after years of use. That is because EcoKote will not Fade, Chalk or Discolor for a minimum of 5 years. No expensive repaints to cover normal wear and tear!
• Normal Maintenance in many cases is rain!
• Waterproof. Moreover, EcoKote's superior vapor permeation properties allow it to "breathe", so water vapor will not cause blistering. Actually, once cured, it is one of the hardest paints you will find.
• Displays thermal expansion and shrinkage properties compatible with the substrate even at thermal shocks between - 80 C and + 80 C. Does not blister or peel as the substrate "moves".
• Suitable for continuous use between 80 C and 200 C.
• Has anti-static properties so dirt does not adhere.
• No primer on most surfaces! Can be used on directly on Gelcoat, Fiberglass, Carbon fiber, Unprimed Aluminum, Galvanized Steel, and Wood. Only carbon steel requires primer.
• Applied with very low pressure spray so most of the paint goes onto the substrate, not into the air. Painters need only a respirator, not a moon suit! NO EPA ISSUES!
• Easy to apply. Can be used inside and outside without special equipment. No billowing clouds of toxic material.
• Non-toxic. Water based. Thins with water. Does not require special handling, special equipment to apply, spray booths, or licensed waste hauling. Waste Disposal is the same as household latex paint. No Hazmat issues! Not reportable under EPA rules!

Big claims? Yes. But backed up by over 20 years of real world use!

Nothing in the marine coatings area can compete with EcoKote. There is truly nothing else like it.

I urge you to contact us so we can send you a sample of unprimed, bare aluminum foil painted with our product.

I guarantee you will be amazed.

The EcoKote staff